2022年6月 – ページ 5

動作中を示すためのＬチカは良く使うのにライブラリ化してなかったりする。コードが簡単すぎてライブラリ化するまでもないということもあるがもっと簡単に一行だけでも少なくしたいと思ったりすることもある。なのであえてライブラリ化してみた。最大８個まで、どのピンにLEDが繋がっていて点灯にはHIGH/LOWのどちらを出力すればいいのかを指定し登録する。指定時間毎に点滅や指定時間後に点灯或いは消灯などの機能も盛り込んでみた。自分でいうのもなんだが以外に使い勝手はいいかも。

【サンプル】

#include "device.h"

void setup(void)
{
  /* LEDピンを登録 */
  LED::setup(0, Gpio::DIO18, HIGH);
  /* 点灯 */
  LED::on(0);
  /* 消灯 */
  LED::off(0);
  /* 点灯消灯切替 */
  LED::toggle(0);
  /* 1秒後に消灯 */
  LED::off(0, 1000);
  /* 1秒後に点灯 */
  LED::on(0, 1000);
  /* 1秒毎に点灯消灯切替(連続モード) */
  LED::toggle(0, 1000);
}

void loop(void)
{
}

#include "device.h"

void setup(void)

{

/* LEDピンを登録 */

LED::setup(0, Gpio::DIO18, HIGH);

/* 点灯 */

LED::on(0);

/* 消灯 */

LED::off(0);

/* 点灯消灯切替 */

LED::toggle(0);

/* 1秒後に消灯 */

LED::off(0, 1000);

/* 1秒後に点灯 */

LED::on(0, 1000);

/* 1秒毎に点灯消灯切替(連続モード) */

LED::toggle(0, 1000);

}

void loop(void)

{

}

【ライブラリ】

/*
  led.h - LED Library for NXP-JN516x

  Copyright (c) 2022 Sasapea's Lab. All right reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General
  Public License along with this library; if not, write to the
  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
  Boston, MA  02111-1307  USA
*/
#pragma once

#include "alarm.h"
#include "gpio.h"

#ifndef LED_BIT_LEN
#define LED_BIT_LEN 1
#endif
#define LED_BIT_COUNT (1 << LED_BIT_LEN)
#define LED_BIT_MASK  (LED_BIT_COUNT - 1)

class LED
{
  public:

    LED(void);
    static void init(void);
    static void setup(uint8 led, Gpio::PIN pin, uint8 off);
    static void off(uint8 led = 0, uint16 ms = 0);
    static void on(uint8 led = 0, uint16 ms = 0);
    static void toggle(uint8 led = 0, uint16 ms = 0);
    static bool status(uint8 led = 0);
    static bool expire(uint8 led = 0);
    static void handle(void);

  private:

    typedef enum
    {
      MODE_DISABLE,
      MODE_OFF,
      MODE_ON,
      MODE_TOGGLE,
    } MODE;

    typedef struct
    {
      Gpio::PIN pin;
      uint32    off;
      MODE      mode;
      bool      expire;
      Alarm     alarm;
    } LEDCTRL;

    static LEDCTRL _leds[LED_BIT_COUNT];

    static void control(LEDCTRL& ctrl, MODE mode, uint16 ms);
};

led.h - LED Library for NXP-JN516x

This library is free software; you can redistribute it and/or

modify it under the terms of the GNU Lesser General Public

License as published by the Free Software Foundation; either

version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General

Public License along with this library; if not, write to the

Free Software Foundation, Inc., 59 Temple Place, Suite 330,

Boston, MA 02111-1307 USA

#pragma once

#include "alarm.h"

#include "gpio.h"

#ifndef LED_BIT_LEN

#define LED_BIT_LEN 1

#endif

#define LED_BIT_COUNT (1 << LED_BIT_LEN)

#define LED_BIT_MASK (LED_BIT_COUNT - 1)

class LED

{

public:

LED(void);

static void init(void);

static void setup(uint8 led, Gpio::PIN pin, uint8 off);

static void off(uint8 led = 0, uint16 ms = 0);

static void on(uint8 led = 0, uint16 ms = 0);

static void toggle(uint8 led = 0, uint16 ms = 0);

static bool status(uint8 led = 0);

static bool expire(uint8 led = 0);

static void handle(void);

private:

typedef enum

{

MODE_DISABLE,

MODE_OFF,

MODE_ON,

MODE_TOGGLE,

} MODE;

typedef struct

{

Gpio::PIN pin;

uint32 off;

MODE mode;

bool expire;

Alarm alarm;

} LEDCTRL;

static LEDCTRL _leds[LED_BIT_COUNT];

static void control(LEDCTRL& ctrl, MODE mode, uint16 ms);

};

/*
  led.cpp - LED Library for NXP-JN516x

  Copyright (c) 2022 Sasapea's Lab. All right reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General
  Public License along with this library; if not, write to the
  Free Software Foundation, Inc., 59 Temple Place, Suite 330,
  Boston, MA  02111-1307  USA
*/
#include "led.h"

LED::LEDCTRL LED::_leds[];

LED::LED(void)
{
  init();
}

void LED::init(void)
{
  LEDCTRL *ctrl = _leds;
  for (uint8 i = 0; i < LED_BIT_COUNT; ++i, ++ctrl)
  {
    ctrl->pin    = (Gpio::PIN)-1;
    ctrl->off    = LOW;
    ctrl->mode   = MODE_DISABLE;
    ctrl->expire = false;
  }
}

void LED::setup(uint8 led, Gpio::PIN pin, uint8 off)
{
  LEDCTRL& ctrl = _leds[led & LED_BIT_MASK];
  ctrl.pin    = pin;
  ctrl.off    = off;
  ctrl.mode   = MODE_DISABLE;
  ctrl.expire = false;
  Gpio::digitalWrite(pin, off);
  Gpio::pinMode(pin, Gpio::OUTPUT);
}

void LED::off(uint8 led, uint16 ms)
{
  control(_leds[led & LED_BIT_MASK], MODE_OFF, ms);
}

void LED::on(uint8 led, uint16 ms)
{
  control(_leds[led & LED_BIT_MASK], MODE_ON, ms);
}

void LED::toggle(uint8 led, uint16 ms)
{
  control(_leds[led & LED_BIT_MASK], MODE_TOGGLE, ms);
}

void LED::control(LEDCTRL& ctrl, MODE mode, uint16 ms)
{
  ctrl.expire = false;
  if (ms)
  {
    ctrl.mode = mode;
    ctrl.alarm.interval(ms * 1000UL);
  }
  else
  {
    ctrl.mode = MODE_DISABLE;
    switch (mode)
    {
      case MODE_OFF:    Gpio::digitalWrite(ctrl.pin,  ctrl.off); break;
      case MODE_ON:     Gpio::digitalWrite(ctrl.pin, !ctrl.off); break;
      case MODE_TOGGLE: Gpio::digitalWrite(ctrl.pin, !Gpio::digitalRead(ctrl.pin)); break;
      default: break;
    }
  }
}

bool LED::status(uint8 led)
{
  LEDCTRL& ctrl = _leds[led & LED_BIT_MASK];
  return Gpio::digitalRead(ctrl.pin) != ctrl.off;
}

bool LED::expire(uint8 led)
{
  LEDCTRL& ctrl = _leds[led & LED_BIT_MASK];
  bool rv = ctrl.expire;
  ctrl.expire = false;
  return rv;
}

void LED::handle(void)
{
  LEDCTRL *ctrl = _leds;
  for (uint8 i = 0; i < LED_BIT_COUNT; ++i, ++ctrl)
  {
    MODE mode = ctrl->mode;
    if ((mode != MODE_DISABLE) && ctrl->alarm.expire())
    {
      control(*ctrl, mode, 0);
      ctrl->expire = true;
      if (mode == MODE_TOGGLE)
        ctrl->mode = mode;
    }
  }
}

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

led.cpp - LED Library for NXP-JN516x

This library is free software; you can redistribute it and/or

modify it under the terms of the GNU Lesser General Public

License as published by the Free Software Foundation; either

version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General

Public License along with this library; if not, write to the

Free Software Foundation, Inc., 59 Temple Place, Suite 330,

Boston, MA 02111-1307 USA

#include "led.h"

LED::LEDCTRL LED::_leds[];

LED::LED(void)

{

init();

}

void LED::init(void)

{

LEDCTRL *ctrl = _leds;

for (uint8 i = 0; i < LED_BIT_COUNT; ++i, ++ctrl)

{

ctrl->pin = (Gpio::PIN)-1;

ctrl->off = LOW;

ctrl->mode = MODE_DISABLE;

ctrl->expire = false;

}

void LED::setup(uint8 led, Gpio::PIN pin, uint8 off)

{

LEDCTRL& ctrl = _leds[led & LED_BIT_MASK];

ctrl.pin = pin;

ctrl.off = off;

ctrl.mode = MODE_DISABLE;

ctrl.expire = false;

Gpio::digitalWrite(pin, off);

Gpio::pinMode(pin, Gpio::OUTPUT);

}

void LED::off(uint8 led, uint16 ms)

{

control(_leds[led & LED_BIT_MASK], MODE_OFF, ms);

}

void LED::on(uint8 led, uint16 ms)

{

control(_leds[led & LED_BIT_MASK], MODE_ON, ms);

}

void LED::toggle(uint8 led, uint16 ms)

{

control(_leds[led & LED_BIT_MASK], MODE_TOGGLE, ms);

}

void LED::control(LEDCTRL& ctrl, MODE mode, uint16 ms)

{

ctrl.expire = false;

if (ms)

{

ctrl.mode = mode;

ctrl.alarm.interval(ms * 1000UL);

}

else

{

ctrl.mode = MODE_DISABLE;

switch (mode)

{

case MODE_OFF: Gpio::digitalWrite(ctrl.pin, ctrl.off); break;

case MODE_ON: Gpio::digitalWrite(ctrl.pin, !ctrl.off); break;

case MODE_TOGGLE: Gpio::digitalWrite(ctrl.pin, !Gpio::digitalRead(ctrl.pin)); break;

default: break;

}

bool LED::status(uint8 led)

{

LEDCTRL& ctrl = _leds[led & LED_BIT_MASK];

return Gpio::digitalRead(ctrl.pin) != ctrl.off;

}

bool LED::expire(uint8 led)

{

LEDCTRL& ctrl = _leds[led & LED_BIT_MASK];

bool rv = ctrl.expire;

ctrl.expire = false;

return rv;

}

void LED::handle(void)

{

LEDCTRL *ctrl = _leds;

for (uint8 i = 0; i < LED_BIT_COUNT; ++i, ++ctrl)

{

MODE mode = ctrl->mode;

if ((mode != MODE_DISABLE) && ctrl->alarm.expire())

{

control(*ctrl, mode, 0);

ctrl->expire = true;

if (mode == MODE_TOGGLE)

ctrl->mode = mode;

}

月: 2022年6月

NXP JN516X (TWELITE) をプログラミングする（LED)